Explosive welding metals clad plates manufacturer

Aluminium Titanium Stainless Steel Cryogenic Transition Joints

Home»Cryogenic Transition Joints»Aluminium Titanium Stainless Steel Cryogenic Transition Joints

Aluminium Titanium Stainless Steel Cryogenic Transition Joints

Phohom Cryogenic Transition Joint solves weld problem of dissimilar metals such as aluminum and stainless steel. 100% metallurgy bonded and interface defects free ensured by ultrasonic inspection. can be used to combine corrosion resistance, higher thermal conductivity, lightweight, low cost, machinability, and several other properties not found in any one metal.

  • Brand: PHOHOM or customized
  • Bonding Processing: Explosion Weld
  • Base Metal: Copper, Steel or Custom-Made
  • Certification: CE, ISO, RoHS, UL
Inquiry Now

Products details:

Materials Base Metal: Aluminium and aluminium alloy
Clad Metal Stainless steel
Interlayer TA1/TA2/TA9/TA10, titanium or titanium alloy
Product Standard Upon ISO, ASTM, ASME, JIS, NB, JB
Certificate ISO, SGS
Bonding Rate 100%

We provide transition joints (aluminum- stainless steel) for the cryogenic market, in particular for heat exchanger in gas application. This product allows the connection between 2 pipes, one in aluminum and one in stainless steel, in low temperatures and high pressures working conditions.

Explosion Welding Aluminium Titanium Stainless Steel Cryogenic Transition Joints manufacturer for chin

Type Ambient Temp Bearing Capacity Helium Leak Test
CJ101 -83~300??
Cryogenic liquids or gas
0.1MPa ??pd??35MPa ??1 x 10-5 atm-cc/sec
CJ102 -130~300??
Liquid oxygen
0.1MPa ??pd??35MPa ??1 x 107atm-cc/sec
CJ103 -190~350??
Liquid nitrogen
0.1MPa ??pd??100MPa ??1 x 109atm-cc/sec


Aluminum has excellent electrical conductivity and thermal conductivity, making it widely used in the electrical industry. Aluminum is non-ferromagnetic, which is an important characteristic for the electrical industry and the electronics industry.

The specific strength of some aluminum alloys is comparable to that of steel, and its specific stiffness exceeds that of steel. Therefore, aluminum alloy materials have been widely used in transportation, chemical industry, machinery, power, electronics and construction, especially in aerospace industry.

The temperature of the joint is usually <300??. If titanium is added between aluminum and steel, both aluminum titanium steel bimetallic bimetal transition joints are used, the bonding strength and conductivity can remain unchanged when the service temperature reaches 450 ??.

Base plate alloy Q235??Q245R??Q345R??DH36??CCSB
Middle plate alloy TA1??TA2
Cladding plate alloy 5083, 1060,1070
Standard CB 1343-98
Cladding plate thickness ??10mm
Base plate thickness ??12mm
Length ??3000?L
Width ??20mm


1. Aluminum-titanium stainless steel pipe joints are used for the transition connection between the components of large-scale cold mills and the pipes conveying liquid nitrogen and liquid oxygen.

2. Aluminum titanium steel bimetallic bimetal transition joints used in ship structure construction.

3.Titanium acts as the intermediate layer in the multi-layer composite plate which replaces the flange connection in the cryogenic device, such as the corrosion-resistant aluminum alloy-pure aluminum-titanium-nickel-stainless steel composite plate.


There are no reviews yet.

Be the first to review “Aluminium Titanium Stainless Steel Cryogenic Transition Joints”

Your email address will not be published. Required fields are marked *


Go to Top